No.
|
Description
描述
|
01.
|
Secure position with traffic cones and cordon. Clean splices between main frame and cover-plate.
用交通警示锥与警戒条将地井区域围住。清洁主结构框架与盖板之间的接缝。
|
02.
|
Cleaning of the pit system.
清扫地坑系统。
|
03.
|
Clean whole interior of pit.
清扫井坑内的所有空间。
|
04.
|
Check all screws for tight adjustment.
检查所有螺丝是否松紧合适。
|
05.
|
Check water and air-outlets (if present) for leak tightness.
检查水管与压缩空气管(如果存在)是否渗漏。
|
06.
|
Check waste water hoses and drainage hoses for leak tightness (if present).
检查排水管是否渗漏(如果存在)。
|
07.
|
Check all termination boxes for damages and for proper tight attachment of the clamps and check wiring.
检查所有接线箱是否损坏、其固定件是否紧固正常,检查布线情况。
|
08.
|
Function check of proximity switch/limit switch.
检查接近开关/ 限位开关是否工作正常。
|
09.
|
Check all cable connections of visual damages.
检查所有电缆接头是否存在外观损坏。
|
10.
|
Check all electrical components of visual damages.
检查所有电气部件是否存在外观损坏。
|
11.
|
General view- & function control of the pit systems.
总体查看 – &检查该地井系统的控制装置是否工作正常。
|
12.
|
Grease of all relevant mechanical components
(interlocking, bearing, etc.)
为地井的相关机械部件添加润滑脂
|
13.
|
Check pop-up-unit for smooth running.
检查弹出装置是否运转顺畅。
|